SS:SSD Mobile PCIe NVMe M.2 SSD Multi-session Drive Duplicator

SS:SSD Mobile PCIe NVMe M.2 SSD Multi-session Drive Duplicator

The SS:SSD Mobile hard disk drive and SSD duplicator, is a compact and portable cloning solution. A full-color touch screen provides an intuitive interface and support for SATA, PCIe (NVME or AHCI), mPCIe and USB3 makes the SS:SSD an extremely versatile duplicator.

Faster than software-based cloning the SS:SSD saves time and resources for all your duplicating tasks including software updates, new PC rollouts and content distribution.

The hand-held SS:SSD provides the convenience of on-site as well as "on the bench" duplication. This feature-packed solution is simple and easy to use, and novice users will appreciate the various profile settings with best estimated cloning methods.

Features

• Up to two target and two master drive to drive duplication
• Hard Drive cloning at speeds approaching 24GB/min
• Support for SSD (PCIe NVMe, AHCI, SATA, Mini PCIe), SATA HDD and USB3 ports
• Supports cloning in Mirror mode (Operating System Independent)
• Write-protected master drives. SS:SSD ports that are designated as a source/master are automatically write-blocked to prevent any alteration to sensitive data on the source drive
• Advanced software including SmartCopy, Selective Partitions, MirrorCopy and MasterManager
• Mirror Copy (bit for bit copy). Supports all O/S including Windows, Linux and MAC
• Network sharing: Allows network access (upload/download) to drive images and log files
• Hash verification: (SHA1, SHA256 or MD5) - Users can clone and verify the exact replication of the master drive in one single process Hash verification is embedded in the audit trail/log file (optional)
• Multi-Image Master: Store multiple images created in SS:SSD in a repository on a SATA drive or on a USB enclosure connected to the SS:SSD and then clone to selected target drives. Users can also store multiple SS:SSD created images on a shared network location and then clone to selected targets (optional)
• Multi-sessions capability - Allows the user to perform multiple tasks (up to 5), including cloning, wiping of different drives concurrently
• For Multiple partition drives, SS:SSD automatically selects the optimum cloning method (Clever or Mirror)
• SmartCopy (copies only data areas, skips blank sectors, scales partitions to target). Supports FAT16/FAT32/NTFS and Linux (ext, ext2, ext3, ext4) file systems - adjusting all necessary target drive structures so the target will boot
• Wipe feature. Sanitizes hard drives to DoD 7-pass specification, offers Secure Erase and custom pass settings, meets NIST 800-88 guidelines
• Compact footprint of 7.6” X 5.5” X 2.6” takes up minimal real estate on the work bench. The SS:SSD weighs approximately 2.0 lbs.
• Color touch screen display provides an intuitive and easy to use interface
• Bad sector handling. Scan for bad sectors on the source drive, abort or skip and log for review.
• Audit trail/log reports provide detailed information on each task. A digital signature is included in the report for authentication purposes
• Additional features include HPA/DCO support, a HDMI port for connection to a monitor and 2 USB 2.0 host ports for keyboard or mouse connectivity

Technical Application Notes - Understanding mini PCIe, mSATA and M.2 SSDs

• mSATA and Mini PCIe (mPCIe) - These SSDs have similar connectors. The mSATA SSD is Serial-ATA based, while the Mini PCIe is PCIe based. These two types of SSDs are not interchangeable.
  
  
• M.2 Solid State Drives (SSDs) come with one of two types of physical layers (PHY) and three types of controllers:
• SATA physical layer – SATA M.2 SSDs utilize the SATA controller.
• PCIe physical layer – There are two controllers for PCIe M.2 SSDs: AHCI Controller or NVMe Controller
  
  
• Typically, SATA M.2 SSDs utilize the “B & M key” while PCIe NVMe or PCIe AHCI SSDs utilize the “M key”.