DataGone Hard Drive Degausser
The DATAGONE is a fully automatic degausser for Hard Disk's and Backup tapes. It uses pulse discharge technology and is fully processor controlled which enables the DATAGONE to offer a complete and secure erase on magnetic media. Media that can be degaussed includes Hard Drives that use both perpendicular and vertical recording techniques and most common backup tapes including DLT, LTO, 8mm, DDS and more.
Performance
The DATAGONE generates a powerful magnetic field and in less than a second completely erases the complete data from Hard Drives and Backup tapes. Its simple one pass fully automatic operation makes it ideal for businesses where security is of the utmost importance.
Operation
When powered up the DATAGONE table top mounted unit simply slides the hard drive into the aperture on the left hand side of the unit. The unit senses the presence of the media DATAGONE High Energy Automatic Hard Drive & Backup Tape Degausser and the degauss cycle starts automatically. No operator action is required. When the degauss cycle is complete, the hard drive is released and exits from the degausser on the right hand side. Throughout the entire degauss cycle the onboard processor monitors the procedure and progress messages are displayed on the LCD panel. If the degauss cycle is interrupted for any reason such as power loss or any fault condition, the media is retained in the DATAGONE and the operator is immediately alerted to the interruption in the erasure cycle on the LCD panel. To eject media when the cycle has failed for any reason the operator has to press the reset button. This releases the Hard Drive or Tape and resets the degauss cycle. The operator should then attempt a repeat erasure. The entire erasure process takes approximately 8 seconds
Features
- Single Pass Fully Automatic Operation
- Over 250 drives erased per hour
- Complete Erasure of hard drives and Tapes
- Processor Controlled operation for Failsafe erasure
- Effective on Longitudinal & Perpendicular Hard Drives
- Free lifetime technical support
- Optional transport case available
| Degauss Method: | Pulse discharge, chamber degausser |
| Media Handling: |
Standard PC, Laptop and Server 3.5", 2.5" & 1.8" Hard Drives, including all Longitudinal & Perpendicular Hard Drives. All Drive interfaces IDE, SATA and Fibre Channel. All Backup tapes including DLT, 2, 3, 4, 5, 6 & S-DLT, LTO1, 2, 3, 4, 5, 6 & 7; 3480/3490/3490e, 3590, 9840 & T9940 & T10000 tape; Ultrium & Redwood SD-3 tape & cartridges; Mammoth 1 & 2, 8mm, AIT1 & 2, M2 tape; DDS 1, 2, 3, 4 & 5, DD-2 & DFT-1 |
| Media Chamber/Slot Capacity: | 1.1" x 4.3" (279mm x 109.2mm) |
| Magnetic Force: | 10,000 gauss |
| Cycle Time/Erase Time: | 8 seconds typical |
| Thoroughput: | 300 3.5" hard drives per hour typical 600 2.5" hard drives per hour typical |
| Duty Cycle: | Continuous |
| Power Supply: | 110 - 115 VAC, 60Hz |
| Current Rating: | 9 Amps typical |
| Controls: | On/Off Power switch, Erase Button |
| Dimensions (WxHxD): | 36 x 48.5 x 36cm (14.3" x 19.1" x 14.3") |
| Unit Weight: | 64lbs (219g) |
| Packed Dimensions (WxHxD): | 50 x 74 x 50cm (19.5" x 29.1" x 19.5") |
| Packed Weight: | 75lbs (34kg) |
| Temperature: | 41°F - 104°F (5°C - 40°C) |
| Humidity: | 10%H - 40%H without condensation |
| Warranty: | 2 year back to base, all parts and labor |
| Certifications: | CE |
Videos Hide Videos Show Videos
Custom Field
- Over 200 drives erased per hour
- Complete Erasure of hard drives and Tapes
- Processor Controlled operation for Failsafe erasure
- Effective on Longitudinal & Perpendicular HDD
